GSO IEC 60751:2015
Gulf Standard
Current Edition
·
Approved on
03 September 2015
·
Industrial platinum resistance thermometers and platinum temperature sensors
GSO IEC 60751:2015 Files
No files are available for this standard right now!
GSO IEC 60751:2015 Scope
This standard specifies the requirements and temperature/resistance relationship for industrial platinum resistance temperature sensors later referred to as “platinum resistors” or "resistors" and industrial platinum resistance thermometers later referred to as "thermometers" whose electrical resistance is a defined function of temperature. The International Standard applies to platinum resistors whose temperature coefficient α, defined as 0 100 C 100 0 ⋅ ° − = R R R α is conventionally written as α = 3.851 x 10–3 °C–1, where R100 is the resistance at t = 100 °C and R0 is the resistance at t = 0 °C. Values of temperature in this standard are in terms of the International Temperature Scale of 1990, ITS-90. Temperatures in degrees Celsius are denoted by the symbol t, except in Table 1 where the full nomenclature t90/°C is used. The standard covers resistors or thermometers for all or part of the temperature range -200 °C to +850 °C with different tolerance classes, which may cover restricted temperature ranges. For temperature/resistance relationships with uncertainties <0,1 °C, which are possible only
for resistors or thermometers with exceptionally high stability and individual calibration, a
more complex interpolation equation than is presented in this standard may be necessary.
The specification of such equations is outside the scope of this standard.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
OS GSO OIML R121:2007
GSO OIML R121:2007
Omani Standard
The Scale of Relative Humidity of Air
Certified Against Saturated Salt Solutions
GSO OIML R121:2007
OIML R 121:1996
Gulf Standard
The Scale of Relative Humidity of Air
Certified Against Saturated Salt Solutions
Recently Published from Metrology Sector
GSO ISO 10360-10:2024
ISO 10360-10:2021
Gulf Standard
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers
GSO ISO 7626-5:2024
ISO 7626-5:2019
Gulf Standard
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
GSO IEC 62828-4:2024
IEC 62828-4:2020
Gulf Standard
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters
GSO ISO 11807-1:2024
ISO 11807-1:2021
Gulf Standard
Integrated optics — Vocabulary — Part 1: Optical waveguide basic terms and symbols